Tuesday, 23 May 2017

I’m a Bad Influence by Amanda Southern


Hi Everyone,

I have a card for you this week that started off using a piece of card that I used to mop up the colours I had on my craft mat leftover from my make for last Tuesday post.







Here’s What I Did:


For Last Tuesday’s post I was using Lindy’s Stamp Gang pigment powders and this left me pools of the colours on my craft mat, now I never like to waste the left overs so I mopped the colours up onto a piece of mixed media card to use for another project. 

So taking that piece of card I decided to stencil on top of the pigment powder colours using a Seth Apter stencil and Dylusions paints, I blended the paint colours into each other and built them up by apply through the stencil using Cut and Dry Foam. Once the paint was dry I then went around each segment of the stencilling with a black paint pen.

I then die cut sections of the piece out and cut exactly the same pieces out of black card and then inserted them into the die cut spaces (I shall keep the pieces for another project).






I then stamped the image and coloured with Spectrum Noir pencils, cut out and added to the card.

The sentiment was stamped, cut out and added to the card. I then mounted it onto black card and added to an 8” x 8” card blank.


What I Used:


Seth Apter Stencil (this one was from my stash) others are available but any stencil would work.
Black Posca Paint Pen or similar
Seth Apter Dies - Trifecta and Coffee Ring
Die Cutting Machine
Spectrum Noir Colourblend Pencils (blended with blended solution and Paper Stumps)
Black Archival Ink Pad

Thanks and I’ll see you next Tuesday

Love
Amanda X

Monday, 22 May 2017

Treasure Adventure by Moira Sutton





Carabelle Studio Stamps – Collage des Ronds and Mixed Media Strips
Prima Finnabair Stamp – Messy
Idea-Ology Ornate Plate
Ranger Embossing Powders – Turquoise and Magenta
Rusty Wire



I cut a large tag from the mixed media paper.
Next I stamped several background images using the Watering Can ink pad.
I passed the modelling paste through the stencil in a few places and then sprinkled the embossing powders over and heat set. I coloured the tag using three colours from the Metallic Accents set. 
The Idea-Ology Ornate Plate and Relics and Artifacts sword were coloured using the Metallic accents, the Sparks paint and the wax and attached with silicone glue.
I added the Chit Chat Stickers and edged the tag with a purple Gelato.
Finally I would old rusty wire round the tag. 

Moira

Sunday, 21 May 2017

Make A Wish by Lynne Moncrieff


This card was made for a friend’s birthday, knowing she liked Character Constructions stamps.

I intentionally kept the design simple as I wanted the focus to be on the beautiful vintage French paper and the stamped focal.  At first viewing you might not realise that this image comprises several individual stamps.

The complete Character Constructions stamp catalogues can be viewed at http://www.characterconstructions.com/.  If you have any questions regarding availability of Character Constructions stamps, then please contact Laura directly or myself via my Blog and I can contact Laura on your behalf.







Supplies


Character Constructions Stamp Sets - Blue Daisy No. 7 (woman and hat) – I also used stamps from other Blue Daisy sets:- No. 2 (flower on stem and flower head).  No. 6 (arms)
Glue Stick (UHU or Tombow)
Double Sided Tape
Extras: Vintage Paper, Fabric, Lace



Instructions


Card


Adhere vintage French paper to cardbase. Stamp woman. Trim waist with fabric scrap.  Onto scrap pieces of vintage paper, stamp hat, arm and flower. Fussy cut. Adhere hat to woman’s head. Cut upper arm to make a suitable length. Apply adhesive only to upper end of arm. Adhere to main image. Slightly bend the arm and hand before adhering the flower to her hand. 









Stamp Affirmation onto scrap paper. Only Make A Wish from the Affirmation is required.  Layer to lace and fabric scraps below stamped focal. 






Onto another piece of scrap paper, stamp flower three times. Cut into flag shape. Attach fabric scraps before adhering to upper corner.





Insert


I thought I would also share the insert and envelope detail. I had already written my birthday message to my friend which is why I have obscured some of the insert and envelope.

Tear paper to required size. Stamp ELB sentiment onto paper. Adhere top edge to inside cardbase with double sided tape. 





Envelope


Onto two tiny scraps of paper, stamp flower and onto other piece, ink up “wish” only from Affirmation stamp. Adhere to upper corner of envelope with fabric scraps.


Until next time,

Wishes

Lynne

Saturday, 20 May 2017

Bird Nest Shrine by Moira Sutton


 


That’s Crafty!  8x8 Stencil - Big Floral - TC8005
Prima Art Alchemy Paints – Opal Magic Violet Green Opal Magic Pink Blue, Opal Magic Blue Gold, Metallique Light Patina Metallique Rich Turquoise
Prima Art Ingredients Glass Beads - Grass and Micro Beads - Copper
Prima Art Alchemy Wax – Vintage Gold and Amethyst Magic
From stash – Bird Mould, Bird Nest, Wooden Eggs


With the weather so gorgeous (I did make this a few eeks ago!) my mind flitted to all things new which inspired this piece about a bird and her nest of eggs.
I began with using the paperclay in the bird mould and leaving to dry over night. When the bird was dry I painted it with the Teal paint and added Vintage Gold Wax.





For the shrine I started with passing Modelling Paste through the stencil onto the front of the Shrine. I made the shrine up and dotted all 5 colours of the Art Alchemy paint all over the inside and the stencilled front. 





Next I added the waxes over the stencilled area for definition.

I constructed my shrine and added the glass beads and rhinestone banner using gel medium. 

Moira

Friday, 19 May 2017

Marina’s Treasure Trove by Fliss Goodwin


Hi there, I’m so excited to finally be able to share with you all the first of my creations with Donna’s gorgeous new Deep Sea Divas stamps. I was beyond thrilled to have the chance to work with these versatile stamps, especially Marina who brings back memories of my childhood and my favourite animation show, Stingray.






Ingredients:


DecoArt Media Acrylic Paints – Blue Green Light, Cobalt Teal Hue, Green Gold, Yellow Green Light
Stickles Glitter Glue – Jade, Lime Green, Lavender
Shimmering Watercolour Paints such as Prima Watercolour Confections Shimmering Lights
Extras – Iron On Hemming Web, Sequins, Beads, Gems, Glass Pebbles, Netting (mine was from a pack of lemons), scraps of Gelli prints, iron, non-stick paper


Recipe:


Paint the MDF upper and base with the green and blue paints, applying in rough streaks down the surface until it is covered. Rub some paint around the edges too for a nice finish.

The next step is to paint the hemming web (this is like Bondaweb) which I did by placing strips on a piece of foil as the paint seeps through.  You may find you need to move it around a little to make sure it is covered with paint. Leave to dry, and then peel off.

Tear the painted web up a little and then iron on to the upright section with non stick paper on top, making sure that you don’t have the steam setting on! Once you have done this, peel back the paper and sprinkle some sequins on the areas covered with webbing. Replace the paper and iron again. When you peel off the paper, the sequins will be stuck to the webbing.


Stamp Marina – masking off her seahorse - on mixed media paper with the black ink and colour her with the watercolour pencils and paints. When dry, paint her hair with the purple glitter glue, adding some to her fishy tail as well. Cut her out. Next stamp the seahorse and a starfish on scraps of Gelli print with the black ink and cut them out.







Assemble the panels by first gluing the upright section into the base. Next add the netting by putting dots of silicone glue around the bottom of the upright then wrap the netting round and secure at the back with more glue. Apply a mix of pearls, beads, gems and glass pebbles to the base with silicone glue.







Glue Marina to the panel together with a seahorse and starfish then finish off the creation by adding streaks of glitter glue and some small gems. As you’ll see, the gems and sequins look a bit like water bubbles and they add some lovely bling too.


Have a great weekend and see you next week.

Fliss x

Thursday, 18 May 2017

Rusty Heart Shrine by Nikki Acton

 





Today’s creation features one of That’s Crafty! MDF Shrines (this one is ATC size with the arch top) and the forever useful MDF hearts (size #3). I began by coating all the pieces in grey chalk paint (I used PaperArtsy Little Black Dress and Chalk combined). I then took some Vaseline and lightly added to the edges of the shrine panels with my finger. (This will later be removed producing the chipped edge effect – an Andy Skinner technique). I then added DecoArt white crackle paint to the surface – quite thinly – it is not important to get a consistent coverage – it is an aged, worn effect I was after!

I left this to dry and worked on my heart. This one had been painted already in brown but I gave it a coat of Red Iron Oxide and added some black to the edges. Once dry I stamped with the cracks stamp from the That’s Crafty! Textures stamp set in black Archival. I then took transparent texture paste and added randomly to the surface with my finger and set aside to dry. Once dry I added a little gilding wax to highlight the texture.






Back to the shrine – once the crackle paint had dried I removed all the Vaseline with a babywipe. I added a wash of Cobalt Teal Hue, then Yellow Iron Oxide and finally Quinacridone Gold around the edges. I stamped with my current ‘go to’ script stamp (Lin Brown/PaperArtsy). Before putting the shrine together I made sure all the edges were black adding a little paint with my finger where required.






To finish I took one of the chipboard quote chips and added some Quinacridone Gold and Paynes Grey to colour it. I took some rusty wire and a previously rusted nut and bolt from my stash and secured them to the heart. 






See you next week

Nikki


Supplies


DecoArt Media Fluid Acrylics – Quinacridone Gold, Yellow Iron Oxide, Paynes Grey, Cobalt Teal Hue, Red Iron Oxide
PaperArtsy Fresco Acrylics – Little Black Dress and Chalk
Archival Ink – Sepia, Black
(From my stash – Vaseline, grey board nut/bolt and rusty wire)

Related Posts Plugin for WordPress, Blogger...